User Manual Q&AAnswer
Dec 09, 2024 - 03:52 AM
To measure DC voltage with the Plusivo DM101 Digital Multimeter, please follow these steps:
1. Insert Batteries: Carefully place two AAA batteries into the battery box, ensuring they are in the correct order.
2. Select Voltage Measurement Mode: Turn the rotary switch to the desired DC voltage range. The available ranges are 200mV, 2V, 20V, 200V, and 600V.
3. Connect the Probes: Plug the black probe into the "COM" port and the red probe into the "V/Ω" port on the multimeter.
4. Connect to the Circuit: Connect the black probe to the ground or negative terminal of the circuit you want to measure. Connect the red probe to the positive terminal of the circuit.
5. Read the Measurement: The LCD display will show the measured DC voltage value.
Note: Ensure that the voltage being measured is within the selected range of the multimeter. If the voltage exceeds the selected range, the multimeter may display "1" to indicate overload.
For more detailed instructions and safety precautions, please refer to the Plusivo DM101 Digital Multimeter Instruction Manual.
Add New Comment