User Manual Q&AAnswer
Dec 09, 2024 - 03:41 AM
To switch between AC and DC power sources on the Jasonwell CZ-208 Portable Electric Air Pump, follow these steps:
1. Ensure that the pump is turned off and unplugged from any power source.
2. Locate the power input port on the pump. It is usually located on the side or back of the pump.
3. For AC power: Connect the AC power adapter to the power input port on the pump. Plug the other end of the AC power adapter into a standard electrical outlet.
4. For DC power: Connect the DC car adapter to the power input port on the pump. Plug the other end of the DC car adapter into your car's cigarette lighter socket.
5. Once the appropriate adapter is connected, you can switch on the pump to start inflating or deflating your inflatable item.
Note: It is important to use the correct adapter for the corresponding power source. Using the wrong adapter may damage the pump or cause it to malfunction. Always refer to the user manual for detailed instructions on using the AC and DC power sources.
Add New Comment