User Manual Q&AAnswers
Dec 09, 2024 - 03:39 AM
To connect the GSPSCN 202 12V Double Cylinders Tire Inflator to your vehicle's power source, please follow these steps:
1. Preparation: Ensure the vehicle is parked on a flat surface and the engine is off.
2. Connection: Plug the power cord into the 12V DC outlet or connect it to the battery using the provided clamps. If using the 12V DC outlet, locate the outlet in your vehicle (usually found near the dashboard or center console) and insert the plug of the power cord into the outlet. If connecting to the battery, attach the red clamp to the positive terminal (+) of the battery and the black clamp to the negative terminal (-).
3. Inflation: Attach the air hose to the tire valve. Ensure a secure connection by pressing the hose firmly onto the valve and locking it in place.
4. Turn on the inflator: Once the connections are secure, turn on the inflator using the power switch or button. The inflator should start running, and you will hear the sound of air being pumped.
5. Monitor the pressure gauge: As the inflator operates, monitor the analog pressure gauge to keep track of the tire pressure. This will help prevent over-inflation and ensure your tires are inflated to the correct pressure.
6. Completion: Once the desired pressure is reached, turn off the inflator by switching off the power or pressing the power button. Remove the hose from the tire valve by releasing any locking mechanism and gently pulling it off.
It's important to note that the specific steps may vary slightly depending on your vehicle and the type of power source you are using. Always refer to the user manual provided with the GSPSCN 202 12V Double Cylinders Tire Inflator for detailed instructions and safety precautions.
Dec 26, 2024 - 06:32 PM
Hi Folks: My Wife bought the 'GSPSCN Double Cylinder Vehicle Tire Air Inflating Pump' for me for Christmas. I have a new 2025 Hyundai Tucson SUV. This vehicle does not have a spare time, But it does have a tire repair kit. However, it does not have a cigarette lighter in the console, The vehicle has ports for US-c iPhone power cables. Do you have any recommendations for accessing my vehicle's power source (battery) through the console/dash? Or will I have to open the hood for direct access to the car battery?
Thank you for any help/advice you can provide! Thanks! Joe Baughman
Thank you for any help/advice you can provide! Thanks! Joe Baughman
Add New Comment