User Manual Q&AAnswer
Dec 09, 2024 - 03:22 AM
To switch between continuous and touch-on inflation modes on the TECHSHARE 122 Portable Dual Nozzle Electric Balloon Pump, follow these steps:
1. Setup: Plug the power cord into an outlet.
2. Inflation:
- For continuous mode: Switch the pump to the "ON" position and place the balloon neck on the nozzle. The pump will continuously inflate the balloon until you switch it off.
- For touch-on mode: Press down on the nozzle to start inflation. Release the pressure on the nozzle to stop inflation. This mode allows you to control the bursts of inflation as needed.
3. Finishing: Once the balloon is inflated to the desired size, remove it from the nozzle and tie it securely.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment