User Manual Q&AAnswer
Dec 09, 2024 - 03:20 AM
To inflate an air mattress using the Prextex IAP20 Electric Air Pump, follow these steps:
1. Choose the appropriate nozzle: Select the nozzle size that fits the inflation port of your air mattress. The Prextex IAP20 comes with three nozzle sizes: small, medium, and large.
2. Attach the nozzle: Securely attach the chosen nozzle to the side output port of the pump. Make sure it is tightly connected to prevent air leakage.
3. Connect to a power source: Plug the Prextex IAP20 into a power source. You can use either the AC adapter for home use or the DC adapter for car use.
4. Insert the nozzle into the air mattress: Place the nozzle into the inflation port of your air mattress. Ensure a tight seal to prevent air from escaping.
5. Turn on the pump: Switch on the Prextex IAP20 to start the inflation process. The high airflow rate of the pump will quickly inflate your air mattress.
6. Monitor the inflation: Keep an eye on the air mattress as it inflates. You can adjust the speed of inflation by controlling the power switch.
7. Switch off the pump: Once the air mattress is fully inflated, switch off the Prextex IAP20.
8. Disconnect the pump: Unplug the pump from the power source and remove the nozzle from the inflation port of the air mattress.
Following these steps will allow you to effectively inflate your air mattress using the Prextex IAP20 Electric Air Pump. For further details and safety instructions, please refer to the user manual provided with the product.
Add New Comment