User Manual Q&AAnswer
Dec 09, 2024 - 02:47 AM
To install the VOVO VB-6000SE Electric Smart Bidet, please follow the steps outlined in the installation guide provided with the product. Here is a summary of the installation process:
1. Separate water supply hose:
- Turn the water supply valve clockwise to lock and use a spanner to separate the toilet hose.
2. Connect the T-valve to the toilet and toilet hose:
- Place the T-valve between the toilet and the toilet hose.
3. Remove the existing toilet seat:
- Unfasten the nut and remove the toilet seat.
- Save the old toilet seat lid and nuts for reinstallation later.
- Place the template on the toilet after removing the toilet seat cover.
4. Install the base bracket:
- Place the fixing bolt on the base bracket.
- Align the front of the bidet body and the front of the toilet before fastening the nuts.
5. Install the bidet and secure the remote control holder:
- Slide the bidet and install it.
- Secure the remote control holder to the wall with screws or peel off the double-sided tape sticker on the back of the remote.
6. Connect the hose and turn on the water:
- Connect the hose to the T-valve and the bidet.
- Turn the water supply valve counterclockwise to allow water flow.
- Connect the outlet.
For more detailed instructions and illustrations, please refer to the VOVO VB-6000SE Electric Smart Bidet Installation Guide provided with the product.
Note: It is always recommended to consult a professional plumber if you are unsure or uncomfortable with the installation process.
Add New Comment