User Manual Q&AAnswer
Dec 09, 2024 - 02:43 AM
To switch between automatic and manual modes on the PCFING 73005 Electric Air Balloon Pump, follow these steps:
1. Locate the mode switch on the pump. It is usually located near the power button or on the side of the pump.
2. To activate the automatic mode, ensure the switch is set to the "Auto" or "A" position. In this mode, the pump will inflate balloons automatically with consistent air pressure. This mode is ideal for quickly inflating multiple balloons.
3. To activate the manual mode, ensure the switch is set to the "Manual" or "M" position. In this mode, you have precise control over the inflation of each balloon. Press the nozzle to release air into the balloon and release the nozzle to stop the inflation. This mode allows you to achieve the desired size and shape for each balloon.
4. When switching between modes, ensure the pump is not actively inflating a balloon. It is recommended to switch modes before starting the inflation process.
Note: Make sure to refer to the user manual for any specific instructions or considerations regarding the mode switch and operation of the PCFING 73005 Electric Air Balloon Pump.
Add New Comment