User Manual Q&AAnswer
Dec 09, 2024 - 01:52 AM
The installation process for the TOTO SW2034 Electronic Bidet is outlined in the instruction manual provided. Here are the general steps for installation:
1. Turn off the water supply: Locate the water shut-off valve behind your toilet and turn it off to stop the water flow.
2. Remove the existing toilet seat: Unscrew the bolts securing the current toilet seat to the toilet bowl and lift it off.
3. Install the mounting bracket: Place the mounting bracket onto the toilet bowl and align it with the mounting holes. Secure it in place using the provided bolts.
4. Connect the water supply: Attach the water supply hose from the bidet to the water inlet valve on the toilet tank. Make sure it is tightly secured.
5. Attach the bidet seat: Carefully align the bidet seat with the mounting bracket and slide it into place. Ensure that it is securely attached.
6. Connect the power source: If your bidet requires power, connect it to a nearby electrical outlet using the provided power cord.
7. Turn on the water supply: Slowly turn on the water supply valve to allow water to flow into the bidet.
8. Test the bidet: Press the power button on the bidet's remote control to turn it on. Test the different functions and adjust the settings as desired.
For detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Add New Comment