User Manual Q&AAnswer
Dec 09, 2024 - 01:43 AM
To measure AC voltage with the , follow these steps:
1. Insert the red test lead into the "Input" jack and the black test lead into the "COM" jack.
2. Turn on the Multimeter by setting it to "Continuity Test". Touch the test lead tips together to check if they are connected normally. An audible sound should occur.
3. Turn the rotary dial to the Voltage test setting. Note that the Meter defaults to DC Voltage, so use the "Select" button to reach the AC Voltage test. "AC" will be displayed on the screen.
4. Connect the two test leads to the neutral and live wires respectively (red to live, black to neutral).
5. After the reading stabilizes, record the reading from the LCD screen.
6. Turn the rotary switch to the OFF position to turn off the Meter.
Note: Make sure to pay attention to the voltage setting of the Multimeter and use the "Select" button to choose the correct setting. Also, be aware of the maximum voltage rating of the Meter to avoid damage.
Add New Comment