User Manual Q&AAnswer
Dec 09, 2024 - 01:42 AM
To test for continuity using the KZYEE KM10 Vehicle Super Probe, follow these steps:
1. Set the tool to Resistance mode by pressing the Mode Button until the resistance symbol (Ω) is displayed on the LCD.
2. Connect the probe tip to the circuit or component you want to test.
3. Use the probe tip with the chassis ground or the auxiliary ground lead to complete the circuit.
4. If the circuit or component has continuity, the LCD will display a resistance value close to zero and the green LED will light up. A beep tone will also sound.
5. If the circuit or component does not have continuity, the LCD will display a resistance value other than zero and the green LED will not light up.
Note: The KZYEE KM10 Vehicle Super Probe can also be used to test continuity on wires and components that are attached or disconnected from the vehicle's electrical system.
Add New Comment