User Manual Q&AAnswer
Dec 09, 2024 - 01:26 AM
To refill the fog fluid in the AGPTEK HA0278 Wireless Controller, please follow these steps:
1. Before refilling, make sure to disconnect the appliance from the electric supply.
2. Always unplug the machine before refilling the fluid tank.
3. Allow the machine to cool to room temperature before cleaning or maintaining it.
4. Check the level of fluid before and during use to ensure there is enough fluid in the tank. Operating the machine without fluid will cause severe damage.
5. Use only fog fluid and never put any type of flammable liquids in the water tank.
6. Pour the atomized liquid (excluding) into the water tank.
7. Make sure the metal liquid nozzle is totally immersed in the atomized liquid. If it is not immersed properly, the equipment won't work properly.
8. After refilling, plug the power cord (including) into the power socket.
9. Turn on the fog machine.
10. The machine will start preheating. After 2-3 minutes of warming up, a red light will be shown on the wireless receiver, indicating that it has been heated up and ready to spray.
11. Press the button on the remote to start spraying fog continuously for about 20 seconds. The machine will then stop spraying and start preheating again. When the preheating is finished, it's ready to emit fog again.
12. If you want to stop the spray, press the button on the remote.
13. For your safety, always make sure there is enough fog fluid in the tank before each use and ensure the metal liquid nozzle is totally immersed in the atomized liquid.
14. Do not spray fog directly on people and keep the machine away from heat sources such as fireplaces and radiators.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment