How do I assemble the BOSCH RA1181 Benchtop Router Table? (Bosch Benchtop Router Table Operating Instructions)

Answer

manuals.plus

Dec 09, 2024 - 12:50 AM

To assemble the BOSCH RA1181 Benchtop Router Table, please follow the steps outlined in the operating instructions and safety guide provided in the manual. Here is a step-by-step guide:

1. Start by unpacking all the components and ensuring that you have all the necessary parts listed in the manual.

2. Attach the two leg sets to the table. Each leg set consists of two legs and two braces. Use the provided screws and washers to secure the legs and braces to the table. Make sure to tighten the screws securely.

3. Attach the two fence sub-assemblies to the table. Each fence sub-assembly consists of a fence and a fence plate. Align the holes on the fence with the holes on the table and use the provided screws and washers to secure them together. Again, ensure that the screws are tightened properly.

4. Install the dust collection port. The dust collection port is located on the back of the table. Insert the dust collection port into the designated hole and secure it with the provided screws.

5. Attach the switch box to the table. The switch box is located on the front of the table. Use the provided screws to attach the switch box securely.

6. Finally, attach the power cord to the switch box and plug it into a suitable power outlet.

Please note that these are general instructions, and it is essential to refer to the specific details and illustrations provided in the operating instructions and safety guide for accurate assembly.

For a more visual and detailed guide, please refer to pages 8-11 of the BOSCH RA1181 Benchtop Router Table Operating Instructions and Safety Guide, which can be accessed using the link provided.