How do I install the Amcrest AD110 Smart Home Video Doorbell Camera? (Amcrest Smart Home Video Doorbell Camera Installation Guide)

Answer

manuals.plus

Dec 09, 2024 - 12:43 AM

Step 1: Remove the Faceplate and Bracket
- Use your fingers to pull away and push the faceplate out from the indentations on the sides of the doorbell.
- Use the included Philips head screwdriver to remove the bracket xxxx from the doorbell.

Step 2: Installing the Mounting Bracket
- Remove your existing doorbell and disconnect the wires.
- Place the doorbell bracket to fit your existing doorbell wiring and mark the drill holes with a marker.
- For Wood, Drywall, or Soft Surfaces: Secure the doorbell bracket using the included screwdriver and mounting screws.
- For Concrete, Stucco, or Brick: Drill holes into the mounting surface using a 15/64 masonry drill bit. Insert wall anchors and secure the mounting brackets using the included mounting screws.

Step 3: Connect Doorbell to Existing Wiring
- Loosen the terminal screws located on the back of your Wi-Fi Doorbell using the included Phillips head screwdriver.
- Place your existing doorbell wiring underneath the terminal screws and tighten the screws to secure the wires.
- If your existing doorbell wiring is too short, use the included extra wires and wire nuts to extend your wiring.

Step 4: Mounting the Doorbell
- Feed the wiring back into the wall and secure the doorbell to the mounting bracket using the included screwdriver. Ensure it is correctly secured to the bracket lip at the top.

Step 5: Inserting a MicroSD Card (Optional)
- Locate the MicroSD card slot on the side of the device.
- Raise the MicroSD card flap and insert the MicroSD card with the gold pins facing down.
- Secure the flap back to the doorbell.

Step 6: Turn the Breaker Back On
- The physical installation is now complete. Turn your breaker back on and allow the doorbell to power up. It may take up to 2 minutes for the doorbell to fully power up.

For further assistance with setup and connecting the Amcrest AD110 Smart Home Video Doorbell Camera to your mobile device, download the Amcrest Smart Home app and follow the instructions provided in the app setup. If you need additional help, you can visit the Amcrest support website or contact their customer support at 1-888-212-7538.