User Manual Q&AAnswer
Dec 09, 2024 - 12:34 AM
To install and set up the AC Infinity AI-CLS4 Cloudline Mixed Flow Inline Fan System, please follow the steps below:
1. Determine the desired location for the fan system. It is recommended to install the fan in a location that allows for easy access and maintenance.
2. Ensure that the power source is turned off before starting the installation process.
3. Attach the included mounting bracket to a suitable surface using screws or other appropriate hardware. Make sure the bracket is securely fastened.
4. Connect the provided power cord to the fan system. The power cord should be plugged into a properly grounded electrical outlet.
5. Attach the fan system to the mounting bracket by aligning the holes on the fan with the corresponding holes on the bracket. Secure the fan in place using the included screws.
6. Connect the ducting to the intake and exhaust ports of the fan system. Ensure that the ducting is properly sealed to prevent air leakage.
7. Once the installation is complete, turn on the power source and test the fan system. Use the control panel or remote control (if applicable) to adjust the fan speed and settings according to your preferences.
For more detailed instructions and illustrations, please refer to the AC Infinity AI-CLS4 Cloudline Mixed Flow Inline Fan Systems User Manual provided in the link.
Add New Comment