User Manual Q&AAnswer
Dec 08, 2024 - 11:43 PM
To install the Google GZZN7 Nest Thermostat Trim on an electrical box, follow these steps:
1. Pull the thermostat wires through the hole in the steel plate provided with the trim.
2. Secure the steel plate to the electrical box using two of the included long screws.
3. Snap the thermostat base and trim plate together.
4. xxxx the assembled thermostat base and trim plate onto the steel plate.
5. Check the bubble level in the thermostat base to ensure it is level. If needed, loosen the screws and adjust the position of the thermostat base before re-tightening the screws.
Please refer to the installation instructions provided in the manual for more detailed guidance.
Add New Comment