User Manual Q&AAnswer
Dec 08, 2024 - 11:27 PM
To install and set up the TREATLIFE DS01C Smart Dimmer Switch, please follow the steps outlined in the user manual. Here is a complete guide:
1. Before installation, make sure to turn off the power at the circuit breaker for the switch you are replacing.
2. Remove the existing switch from the wall box, disconnect the wires, and remove the wire nuts.
3. Connect the wires from the wall box to the corresponding wires on the smart dimmer switch. The switch supports both single-pole and 3-way wiring configurations. Refer to the wiring diagram in the user manual for proper connections.
4. Once the wires are securely connected, carefully tuck them back into the wall box and mount the smart dimmer switch using the provided screws.
5. Turn on the power at the circuit breaker and wait for the LED indicator on the switch to start blinking blue.
6. Download and install the "Smart Life" app on your smartphone or tablet from the App Store or Google Play Store.
7. Open the app and create an account if you don't already have one. Log in to the app.
8. Tap the "+" icon to add a new device, then select "Lighting" and choose "Dimmer Switch" from the list.
9. Follow the on-screen instructions to connect the smart dimmer switch to your Wi-Fi network. Make sure your smartphone or tablet is connected to the same Wi-Fi network during the setup process.
10. Once the smart dimmer switch is successfully connected to your Wi-Fi network, you can customize its settings, such as renaming the switch, setting schedules, and creating automation routines, all within the "Smart Life" app.
For more detailed instructions and troubleshooting tips, please refer to the complete user manual provided above.
Add New Comment