User Manual Q&AAnswer
Dec 08, 2024 - 11:21 PM
To charge the DEWALT DXAEJ14 Jump Starter Digital Compressor, follow these steps:
1. Ensure that the jump starter is turned off.
2. Locate the charging port on the jump starter. It is usually located on the side or back of the device.
3. Connect the included AC power adapter to the charging port.
4. Plug the other end of the AC power adapter into a standard electrical outlet.
5. The charging indicator light on the jump starter will illuminate, indicating that it is charging.
6. Allow the jump starter to charge for approximately 5 hours or until the charging indicator light turns solid green.
7. Once fully charged, disconnect the AC power adapter from the jump starter.
It is important to note that the jump starter should be fully charged before using it to jump-start a vehicle or inflate tires. For more detailed information and safety precautions regarding charging the DEWALT DXAEJ14 Jump Starter Digital Compressor, please refer to the user manual provided.
Add New Comment