User Manual Q&AAnswer
Dec 08, 2024 - 11:05 PM
To program the Inteset INT-422 remote to control your TV, follow these steps:
1. Turn on your TV.
2. Press the Device key on the remote that corresponds to the device mode you want to program (A, B, C, or D).
3. Press and hold the SET button on the remote until the red LED blinks twice, then release the button.
4. Enter the first five-digit setup code for your TV using the number buttons on the remote. The LED will blink once for each digit entered.
5. If the LED blinks twice quickly after entering the code, it means the code is valid. If not, repeat steps 2-4 with a different setup code for your TV.
6. Aim the remote at your TV and press the POWER button. The TV should turn off. If it doesn't, repeat steps 3-5 with a different setup code until you find the one that works.
7. Repeat steps 1-6 for any other devices you want to control with the INT-422 remote.
Note: If you own an Apple TV, Xbox One, Windows Media Center system, or Roku device, the setup codes for these devices are pre-programmed to the A, B, C, and D device mode buttons respectively on the remote. If you don't use any of these devices, you can overwrite the pre-programming with your own setup codes.
For more detailed instructions and troubleshooting tips, refer to the Inteset INT-422 Universal Backlit IR Learning Remote User Guide.
Add New Comment