User Manual Q&AAnswer
Dec 08, 2024 - 10:40 PM
To mount the LA4DPMB line array speakers on a wall or ceiling, you will need to use the Galaxy Audio Yoke Bracket, which is specifically designed for this purpose. Here are the steps to mount the speakers:
1. Carefully examine the surface where you plan to mount the speakers to ensure it is secure and stable. Reinforce the surface if necessary.
2. Select the appropriate xxxx holes in the yoke bracket to adjust the mounting angle according to your needs.
3. Attach the yoke bracket to the wall or ceiling using four 1/4"-20 screws. Make sure to use rubber washers and flat washers for added stability.
4. Before drilling pilot holes, ensure that they are smaller than the core diameter of the screws. Use fasteners that are no smaller than 1/4" in size.
5. Once the yoke bracket is securely mounted, you can attach the LA4DPMB speakers to the bracket using the provided mounting points. There are fourteen 1/4-20 T-nut mounting points on the speakers.
6. Follow the instructions provided with the yoke bracket for step-by-step guidance on mounting the speakers and ensuring a secure installation.
For detailed instructions and illustrations, you can refer to the bracket instructions available online at https://www.galaxyaudio.com/assets/up... or scan the QR code provided in the manual.
Please note that it is crucial to mount the speakers securely to prevent them from falling and causing damage or injury.
Add New Comment