User Manual Q&AAnswer
Dec 08, 2024 - 10:37 PM
To install the Ikan BZ2000-ANT Panel Antenna for the Blitz 1000 Pro, please follow these step-by-step instructions:
1. Start by attaching the stand mount brace to the receiver mounting bracket using the 4pcs M3*8 screws.
2. Place the BZ1000 receiver on the receiver bracket and align the 4 holes from the Ikan Quick Mount system on the front of the unit to the 4 holes on the receiver bracket. Use the included 4 x M4 screws to attach the receiver to the bracket securely.
3. Attach the receiver mounting bracket to the panel antenna using the 4pcs M4*8 screws. Make sure the antenna is securely connected to the bracket.
4. Connect the 5 ports of the antenna to the 5 ports on the receiver using the included coaxial cable connectors (NJWC to SMA). Ensure that the connections are tight and secure.
5. Once the antenna and receiver are properly connected, attach the complete assembly to a light stand using the 3/8"-16 threaded hole on the stand mount brace. Make sure the assembly is stable and secure.
6. Finally, install a v-mount battery and any necessary video cables on the receiver to power and connect your video transmission system.
Please note that these instructions are a summary and should be used in conjunction with the detailed operation instructions provided in the manual for the BZ1000-PRO. It is important to follow the instructions carefully to ensure the best performance of your Ikan BZ2000-ANT Panel Antenna and Blitz 1000 Pro system.
For further assistance or troubleshooting, you can refer to the customer support information provided in the manual or visit the Ikan website at www.ikancorp.com.
Add New Comment