User Manual Q&AAnswer
Dec 08, 2024 - 10:21 PM
To connect the Cirago DPM2HDMVGA adapter to your device, please follow these steps:
1. Determine the type of connection you need: Depending on the display device you want to connect to (such as a monitor, TV, or projector), decide whether you need an HDMI or VGA connection.
2. Connect the adapter to your device: Plug the Mini DisplayPort end of the adapter into the Mini DisplayPort on your laptop or tablet.
3. Make the video connection:
- HDMI connection: Connect an HDMI cable from the adapter's HDMI port to the HDMI port on your display device.
- VGA connection: Connect a VGA cable from the adapter's VGA port to the VGA port on your display device.
4. Audio connection (if required): Check if your video source allows audio pass-through. In most cases, the HDMI cable should be able to transfer audio along with the video.
5. Power on both the display device and your device (laptop or tablet).
6. Select the correct input source on your display device: Use the remote control or buttons on your display device to choose the appropriate input source (HDMI or VGA) based on the connection you made.
7. Adjust display settings (if necessary): If the resolution of your display device needs to be adjusted to match the supported resolutions of the adapter (up to 1080p or 1920 x 1200), you can do so in the display settings of your device.
8. Verify the connection: Check that the audio and video are properly communicating. Your device's screen should appear mirrored or expanded on the display device. When you're finished, safely unplug the adapter from both the device and the display.
Please note that these instructions are general guidelines, and it's always recommended to consult the product manual or contact the manufacturer's support for specific troubleshooting or compatibility issues.
Add New Comment