User Manual Q&AAnswer
Dec 08, 2024 - 09:47 PM
To operate the dumping function of the TR-112 Remote Control Dump Truck, follow these steps:
1. Ensure that the truck is turned on and the batteries are properly installed in both the truck and the remote control.
2. Use the remote control to drive the truck to the desired location where you want to dump the load.
3. Once the truck is in position, locate the button on the remote control that controls the dumping function. This button is usually labeled or marked with an icon representing a dumping bed.
4. Press and hold the dumping button on the remote control. This will activate the dumping function of the truck.
5. As you hold the button, you will see the bed of the truck start to raise, allowing the load to be dumped.
6. Release the dumping button on the remote control once the bed has reached the desired dumping angle or when the load has been fully dumped.
7. To lower the bed back to its original position, simply release the dumping button on the remote control. The bed will gradually lower until it is fully closed.
It's important to note that the specific location and design of the dumping button may vary slightly depending on the model or version of the TR-112 you have. For more detailed instructions and illustrations, please refer to the user manual that came with your TR-112 Remote Control Dump Truck.
Add New Comment