User Manual Q&AAnswer
Dec 08, 2024 - 09:33 PM
To pair the Tera 8100 scanner with your computer using Bluetooth, please follow these steps:
1. Ensure that your computer has Bluetooth capabilities and that it is turned on.
2. Turn on the Tera 8100 scanner by pressing and holding the power button until you see lights or hear beeps indicating that it's powered on.
3. Put the scanner into Bluetooth pairing mode. The exact method may vary depending on the model, so refer to the user manual for specific instructions. Typically, you may need to press and hold a specific button or scan a special barcode to activate pairing mode.
4. On your computer, go to the Bluetooth settings. This can usually be found in the system tray or in the settings menu.
5. In the Bluetooth settings, look for the option to add a new device or to search for nearby devices. Click on this option to start the scanning process.
6. Your computer should detect the Tera 8100 scanner in the list of available devices. Select the scanner from the list to initiate the pairing process.
7. Follow any on-screen prompts or enter any required passcodes or PINs to complete the pairing process. The scanner and computer will establish a secure Bluetooth connection.
8. Once the pairing is successful, the scanner should be connected to your computer via Bluetooth. You can now use the scanner to scan barcodes directly into applications or software on your computer.
If you are still experiencing difficulties with the Bluetooth pairing process, please consult the user manual for your specific model of the Tera 8100 scanner. The manual should provide detailed instructions and troubleshooting tips for Bluetooth connectivity.
Add New Comment