User Manual Q&AAnswer
Dec 08, 2024 - 09:27 PM
To switch between HDMI input devices using the VWRHar HW002 HDMI Switch Splitter, you can follow these steps:
1. Ensure that all your HDMI devices are properly connected to the HDMI inputs of the switch.
2. Connect the HDMI output of the switch to your TV or display using an HDMI cable (not included).
3. Power on all the connected HDMI devices.
4. On the switch itself, you will find a switch button.
5. Press the switch button to cycle through the connected HDMI input devices.
6. Each press of the switch button will change the active HDMI input, and the corresponding device's content will be displayed on your TV or display.
7. You can continue pressing the switch button to switch between the connected HDMI devices as needed.
Please note that only one HDMI input can be active at a time, and two screens cannot display the same content simultaneously with this switch.
For more detailed instructions and information, please refer to the user guide provided with the VWRHar HW002 HDMI Switch Splitter.
Add New Comment