How do I install the Keepsmile KS-1213 Car LED Lights? (Keepsmile Interior Car Lights User Manual)

Answer

manuals.plus

Dec 08, 2024 - 09:19 PM


To install the Keepsmile KS-1213 Car LED Lights, follow these steps:

1. Preparation Before Installing:
   - Unpack the box and check all items listed in the packing list.
   - Power on the strip lights and check whether they light up.

2. Installing Steps:
   - Wipe the installing surface to make sure it's clean and smooth.
   - Install the cigarette lighter and control box in the central console.
   - Peel off the protective film and stick the strip lights as indicated in the picture.
   - Firmly press the strip from end to end and reinforce the ends of the strip with zip ties and screws.
   - Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on.

3. Installation Tips:
   - Please clean the installation surface before installation.
   - If the installation method of installation steps from 2 to 3 cannot be installed firmly well, it is recommended to take the following method for reinforcement installation.
   - The mounting surfaces of hard plastic can be fixed with accessory screws.
   - Velcro can be used to stick to the surface of the wool material to make it stronger. (Glue the adhesive surface of the Velcro and the adhesive surface of the light strip together, and then glue the hook surface of the Velcro to the surface of the wool)

For more detailed instructions and illustrations, please refer to the "Installation Introduction" section in the Keepsmile KS-1213 Interior Car Lights User Manual.