User Manual Q&AAnswer
Dec 08, 2024 - 08:34 PM
To connect the Withings WBS06 Digital Wi-Fi Smart Scale to your Wi-Fi network, please follow these steps:
1. Ensure that your smartphone or tablet is connected to the Wi-Fi network you want to use with the scale.
2. Open the Withings Health Mate app on your device.
3. Tap on the "Devices" tab at the bottom of the screen.
4. Tap on the "+" button in the top right corner to add a new device.
5. Select "Body" from the list of available devices.
6. Follow the on-screen instructions to set up the scale. This may include entering your personal information and creating a Withings account if you haven't already.
7. When prompted, place the scale on a hard, flat surface and wait for it to display a Wi-Fi icon.
8. Tap on the Wi-Fi icon on the scale's display to start the Wi-Fi setup process.
9. On your device, select your Wi-Fi network from the list of available networks.
10. Enter your Wi-Fi network password if prompted.
11. Wait for the scale to connect to your Wi-Fi network. This may take a few moments.
12. Once the scale is successfully connected, it will display a checkmark icon on its display.
Please note that these instructions are a general guide, and the exact steps may vary slightly depending on the version of the Withings Health Mate app and firmware on your scale. For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Withings WBS06 Digital Wi-Fi Smart Scale.
Add New Comment