User Manual Q&AAnswer
Dec 08, 2024 - 08:28 PM
To set the date and time on the iProvèn BPM-337 Blood Pressure Monitor, follow these steps:
1. Make sure the monitor is turned off.
2. Press and hold the SET button for 3 seconds. The monitor will enter the SETTINGS Mode.
3. Use the MEM button to adjust the hour digits that are blinking on the display. Press the SET button to confirm.
4. Repeat step 3 to set the minutes, month, day, and year.
5. Press the SET button one more time to select the desired measurement unit. The default unit is "mmHg" (millimeters of mercury). Press the SET button to save.
6. Once the year is set, the display will show the measurement unit. Press the SET button to save. Alternatively, you can press the MEM button to change the unit to "kPa" (kilopascals) and then press the SET button to save.
7. After the measurement unit is set, the LCD will show "DONE" and the device will shut off.
Please refer to the instruction manual for more detailed information and illustrations on setting up the iProvèn BPM-337 Blood Pressure Monitor.
Add New Comment