User Manual Q&AAnswer
Dec 07, 2024 - 05:58 AM
The installation process for the BOND BD-1000 Add Wi-Fi to Ceiling Fan involves replacing the existing wall switch or canopy module with the smart fan controller. Here are the steps to install the device:
1. Turn off the power: Before starting the installation, make sure to turn off the power to the ceiling fan at the circuit breaker.
2. Remove the existing wall switch or canopy module: Depending on the type of fan you have, you will need to remove either the wall switch or the canopy module. Follow the instructions provided by the manufacturer of your ceiling fan to safely remove the existing switch or module.
3. Install the BOND BD-1000: Once the existing switch or module is removed, follow the instructions provided in the user manual to install the BOND BD-1000. This typically involves connecting the wires from the ceiling fan to the smart fan controller. Make sure to securely fasten the wires and follow the wiring diagram provided in the manual.
4. Connect to Wi-Fi: After the BOND BD-1000 is installed, you will need to connect it to your home's Wi-Fi network. Follow the instructions in the user manual to connect the device to Wi-Fi using the dedicated smartphone app.
5. Test and configure: Once the BOND BD-1000 is connected to Wi-Fi, test the functionality by using the smartphone app to control the ceiling fan. Make sure the fan responds correctly to commands such as adjusting the speed or turning it on/off.
6. Mount the controller: Depending on the mounting type of the BOND BD-1000, either free-standing or wall mount, securely mount the smart fan controller in the desired location.
7. Enjoy smart control: With the BOND BD-1000 installed and connected to Wi-Fi, you can now control your ceiling fan remotely using the smartphone app or voice commands with compatible voice assistants.
Please refer to the user manual provided in the box for detailed installation instructions specific to the BOND BD-1000 Add Wi-Fi to Ceiling Fan.
Add New Comment