User Manual Q&AAnswer
Dec 07, 2024 - 05:12 AM
To connect the BANIGIPA G9 Air Conduction Headset to your device, please follow these steps:
1. Make sure the headset is charged. Connect the included USB Type-C charging cable to the headset and a power source to charge it fully.
2. Turn on the headset by pressing and holding the power button located on the side of the headset until the LED indicator light starts flashing.
3. On your device (e.g., phone, tablet, PC), go to the Bluetooth settings and turn on Bluetooth.
4. Search for available Bluetooth devices. The BANIGIPA G9 Air Conduction Headset should appear in the list of available devices. It may be listed as "G9" or "BANIGIPA G9."
5. Select the BANIGIPA G9 Air Conduction Headset from the list to initiate the pairing process.
6. Once connected, you will hear a voice prompt or see an on-screen notification confirming the successful pairing.
7. You can now start using the BANIGIPA G9 Air Conduction Headset to listen to music, make calls, or use any other audio features supported by your device.
Note: If prompted, enter a passcode or PIN to complete the pairing process. The default passcode for the BANIGIPA G9 Air Conduction Headset is usually "0000" or "1234," but please refer to the user manual for the correct passcode if needed.
For more detailed instructions and troubleshooting tips, please refer to the user manual included in the package.
Add New Comment