User Manual Q&AAnswer
Dec 07, 2024 - 04:45 AM
To pair the Skullcandy S2GTW Grind earbuds with your device, follow these steps:
1. Activate Bluetooth on your device: Go to the settings menu on your phone or other Bluetooth-enabled device and turn on Bluetooth.
2. Open the charging case: Make sure the earbuds are inside the charging case, then open the lid of the case.
3. Enter pairing mode: The earbuds should automatically enter pairing mode when you open the case. If they don't, press and hold the button on either the left or right earbud until you see the LED light flashing.
4. Select the earbuds on your device: On your phone or other device, go to the Bluetooth menu and look for the Skullcandy S2GTW Grind earbuds in the list of available devices. Select them to pair.
5. Confirm pairing: Once you select the earbuds on your device, a confirmation message may appear on your device's screen or you may hear a voice prompt in the earbuds confirming the pairing.
6. Enjoy your music: Once the pairing is successful, you can start playing music or other audio on your device, and it will be wirelessly transmitted to the Skullcandy S2GTW Grind earbuds.
Note: If you have previously paired the earbuds with another device, make sure to disconnect or unpair them from that device before attempting to pair them with a new device.
For more detailed instructions and troubleshooting tips, you can refer to the Skullcandy S2GTW Grind In-Ear Wireless Earbuds User Guide provided with the product.
Add New Comment