User Manual Q&AAnswer
Dec 07, 2024 - 04:36 AM
To connect the Y.D.F OM-059N64 N64 to HDMI Converter Adapter to your N64 console and TV, please follow these steps:
1. Ensure that your N64 console is powered off and unplugged from the power source.
2. Locate the video and audio output ports on your N64 console. These ports are typically located on the back of the console.
3. Connect the included video and audio cables from the N64 console's output ports to the corresponding input ports on the Y.D.F OM-059N64 adapter. The video cable is usually yellow, and the audio cables are typically red and white.
4. Once the cables are securely connected, locate the HDMI output port on the adapter. This port is usually located on the opposite end of the adapter.
5. Connect one end of an HDMI cable to the HDMI output port on the adapter.
6. Connect the other end of the HDMI cable to an available HDMI input port on your TV or display device.
7. Ensure that your TV or display device is turned on and set to the correct HDMI input source.
8. Power on your N64 console and your TV or display device.
9. The N64 console's video and audio signals should now be transmitted through the Y.D.F OM-059N64 adapter to your TV or display device. You should see the N64's video output on your TV screen.
Please refer to the user manual for any additional troubleshooting steps or specific instructions for your setup.
Add New Comment