User Manual Q&AAnswer
Dec 07, 2024 - 04:32 AM
To assemble the VINGLI A3 Swimming Pool Vacuum Cleaner, please follow these steps:
1. Start by unpacking all the components of the vacuum cleaner and ensure that you have all the necessary parts.
2. Attach the handle: Locate the handle and the corresponding attachment point on the vacuum cleaner body. Align the handle with the attachment point and firmly push it in until it clicks into place.
3. Connect the hoses: Take the hoses included in the package and connect them together using the provided connectors. If the hose is too long or too short, you can adjust its length by adding or removing sections of the hose.
4. Attach the vacuum head: Take the vacuum head and connect it to the other end of the hose. Ensure a tight seal by twisting it clockwise until it is securely attached.
5. Install the blue disc: Locate the blue disc included in the package. This disc needs to be installed on the vacuum head. Twist it anticlockwise until it is securely attached.
6. Check for air in the hoses: Before using the vacuum cleaner, make sure there is no air trapped in the hoses. Ensure that the hoses are leak-free and that the pressure is normal.
Once you have completed these steps, your VINGLI A3 Swimming Pool Vacuum Cleaner is ready to use. Refer to the user manual for further instructions on how to connect the vacuum to the pool's filtration system and how to operate the vacuum for effective cleaning.
Add New Comment