User Manual Q&AAnswer
Dec 07, 2024 - 04:29 AM
To connect the Vssoplor MS001 Portable Wireless Mouse to your computer, please follow these steps:
1. Insert the USB receiver: Locate the USB receiver that comes with the mouse. Plug the USB receiver into an available USB port on your computer. Make sure the receiver is securely inserted.
2. Turn on the mouse: If your mouse has an on/off switch, turn it on. This switch is usually located on the underside of the mouse. Check that the mouse's power switch is turned on.
3. Sync the mouse with the USB receiver (if necessary): In some cases, you may need to manually sync the mouse with the USB receiver. This is especially true if you move the receiver to a new USB port or if you use the mouse with a different computer. Look for a small sync button on the mouse and/or the USB receiver. Press the sync button on both devices simultaneously to establish a connection.
4. Wait for the connection: Once the USB receiver is inserted and the mouse is turned on, your computer should recognize the mouse and establish a wireless connection. Wait for a few seconds for the connection to be established.
5. Test the mouse: Move the mouse around to ensure that the cursor on your computer screen responds to the movement. Left-click and right-click to test the mouse buttons. If everything is working properly, the Vssoplor MS001 Portable Wireless Mouse is successfully connected to your computer.
Note: The Vssoplor MS001 Portable Wireless Mouse is designed for plug-and-play functionality, which means you don't need to install any additional software to use it. However, if you encounter any issues during the setup process, refer to the user manual that comes with the mouse for troubleshooting tips and further instructions.
Add New Comment