User Manual Q&AAnswer
Dec 07, 2024 - 04:24 AM
To connect your bookshelf speakers to the DBTMA100 Micro Amp, follow these steps:
1. Ensure that the DBTMA100 is turned off and unplugged from the power source.
2. Use a small flat blade screwdriver to depress the speaker spring terminals on the back of the DBTMA100.
3. Strip the speaker wires back approximately 1/4 inch.
4. Connect the positive (+) wire of each speaker to the corresponding positive (+) terminal on the DBTMA100.
5. Connect the negative (-) wire of each speaker to the corresponding negative (-) terminal on the DBTMA100.
6. Make sure that the speaker wires do not short together and that the polarity is correct.
7. Once the speakers are securely connected, plug the DBTMA100 into a 120VAC wall outlet using the provided AC/DC wall power adapter.
8. Turn on the DBTMA100 and adjust the volume level to your desired listening level.
Please refer to the user manual for more detailed instructions and illustrations on how to connect your speakers to the DBTMA100 Micro Amp.
Add New Comment