User Manual Q&AAnswer
Dec 07, 2024 - 04:15 AM
To connect the Fluval Aquasky LED to the FluvalSmart app, follow these steps:
1. Make sure the lamp is powered on and the Bluetooth connectivity on your mobile device is also turned on.
2. Open the FluvalSmart app on your mobile device.
3. Select the "+" icon in the middle or upper right corner of the interface to scan for compatible Fluval lamps.
4. After your desired lamp appears on the screen, select "Stop" in the upper right corner to end scanning.
5. Select the " " icon next to your lamp and then select the red "√" icon at the bottom of the page to save the lamp to the device list.
6. You should now see the manual control default screen. Select the desired row from the device list to connect the lamp.
7. Enter the initial password "000000" when prompted. Note that you only need to enter the password the first time connecting to the LED lamp. Subsequent connections do not require entering the password as it is stored within the app. You can change the password at a later time if desired.
For more detailed instructions and visuals, refer to the "App and Lamp Connection" section in the Fluval Aquasky 14533 APP Control LED User Manual.
Add New Comment