User Manual Q&AAnswer
Dec 07, 2024 - 04:14 AM
To connect the PetSafe Smart Pet Feeder to your Wi-Fi network, please follow these steps:
1. Make sure the feeder is turned on and the LED indicator is blinking white, indicating that it is searching for Wi-Fi.
2. Open the Smart Feed app on your smartphone and log in to your account or create a new account if you haven't already.
3. In the app, go to the settings menu and select "Wi-Fi Network."
4. Follow the onscreen instructions to connect the feeder to your Wi-Fi network. You may need to enter your Wi-Fi network name (SSID) and password.
5. Once you have entered the correct Wi-Fi network information, the app will attempt to connect the feeder to your network. This process may take a few minutes.
6. If the connection is successful, the LED indicator on the feeder will turn solid white, indicating that it is connected to Wi-Fi.
7. You can now control and monitor the feeder remotely using the Smart Feed app on your smartphone.
If you encounter any issues during the Wi-Fi setup process, please refer to the troubleshooting section in the operating guide or contact the PetSafe Customer Care Center for further assistance.
Add New Comment