User Manual Q&AAnswer
Dec 07, 2024 - 04:05 AM
To install the GIGABYTE GC-WBAX2400R Tri-Band WiFi card, please follow the steps below:
Step 1: Insert the Wi-Fi/Bluetooth card into a PCI Express x1 slot on your motherboard. Connect one end of the USB cable to the USB connector on the Wi-Fi/Bluetooth card.
Step 2: Connect the other end of the USB cable to the F_USB connector on your motherboard.
Step 3: Tighten the antenna cables to the antenna connectors on the Wi-Fi/Bluetooth card respectively.
Step 4: Move the antennas to a location where the signal is good.
For a more detailed installation process, please refer to the GIGABYTE GC-WBAX2400R Tri-Band WiFi Installation Guide provided in the PDF link above.
Note: Make sure to download and install the latest driver from GIGABYTE's website after the computer starts. Adjust your wireless LAN configuration based on your environment after installing the driver.
Add New Comment