User Manual Q&AAnswer
Dec 07, 2024 - 03:47 AM
To install the BOSS Audio Systems CH6530 6.5-Inch Car Stereo Door Speakers, follow these steps:
1. Start by removing the door panels of your car to access the speaker cavity.
2. Once the door panels are removed, locate the old speakers and disconnect the wires connected to them.
3. Remove the old speakers by unscrewing them from their mounting brackets.
4. Position the new CH6530 speakers in the door cavity and align them with the mounting holes.
5. Secure the new speakers in place by using the provided screws and mounting brackets.
6. Connect the wires that run from your car's CD player or car radio to the new speakers. Ensure that you connect the positive wire to the positive terminal and the negative wire to the negative terminal on both the speakers and the radio.
7. Once the connections are made, carefully tuck the wires back into the door cavity.
8. Repeat the installation process for the other door speakers if necessary.
9. Finally, reattach the door panels and ensure they are securely in place.
For more detailed instructions and illustrations, please refer to the BOSS Audio Systems CH6530 6.5-Inch Car Stereo Door Speakers User Guide.
Add New Comment