User Manual Q&AAnswer
Dec 07, 2024 - 03:44 AM
To set up the SY Wireless Bicycle Speedometer and Odometer, follow these steps:
1. Open the electromagnetic cover and insert the battery.
2. Mount the magnet onto two spokes of the front wheel.
3. Install the sensor on the front fork adjacent to the magnet, ensuring a distance of about 5mm between the sensor and magnet.
4. Install the pedestal of the bicycle computer on the handlebar.
5. Fix the bicycle computer onto the pedestal.
6. Secure the receiver to the handlebar using the included wire ties.
7. Trim the extra wire tie ends for a tidy installation.
Please refer to the user manual for detailed instructions and illustrations on the setup process.
Add New Comment