User Manual Q&AAnswer
Dec 07, 2024 - 03:40 AM
To change the blade on the BladeRunner X2, follow these steps:
1. Make sure the saw is unplugged and turned off.
2. Locate the Blade Release button on the side of the saw, near the blade holder.
3. Press and hold the Blade Release button to release the blade.
4. While holding the Blade Release button, carefully remove the old blade from the blade holder.
5. Select the desired replacement blade for your cutting needs.
6. Insert the new blade into the blade holder, making sure it is fully seated and secure.
7. Release the Blade Release button to lock the new blade in place.
8. Double-check that the blade is properly installed and secured before using the saw.
For more detailed instructions and illustrations, please refer to the "Blade Changing" section in the Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw User Manual.
Add New Comment