User Manual Q&AAnswer
Dec 07, 2024 - 03:35 AM
To connect the VEVOR 203DPI Bluetooth Thermal Label Printer to your smartphone or tablet using Bluetooth, please follow these steps:
1. Make sure that the printer is powered on and in Bluetooth mode. You can switch to Bluetooth mode by pressing the Bluetooth button on the printer.
2. On your smartphone or tablet, go to the Settings menu and enable Bluetooth.
3. Open the Bluetooth settings on your device and search for available devices. The VEVOR printer should appear in the list of available devices.
4. Select the VEVOR printer from the list to initiate the pairing process. Your device may prompt you to enter a PIN or confirm a pairing code. Refer to the printer's user manual for the default PIN or pairing code, if required.
5. Once the pairing is successful, your device should be connected to the VEVOR printer via Bluetooth.
6. To print labels from your smartphone or tablet, open the label printing application or software on your device. Ensure that the application is compatible with the VEVOR printer.
7. Within the label printing application, select the VEVOR printer as the printing device. You may need to configure the print settings, such as label size and orientation, within the application.
8. Load the desired label paper into the printer according to the instructions provided in the user manual.
9. Within the label printing application, select the label design or content you wish to print and initiate the printing process.
10. The VEVOR printer should receive the print command from your device via Bluetooth and start printing the labels.
Please note that the specific steps may vary depending on the operating system and device you are using. It is recommended to refer to the printer's instruction manual for detailed instructions and troubleshooting tips related to Bluetooth connectivity.
Add New Comment