User Manual Q&AAnswer
Dec 07, 2024 - 03:33 AM
To program the LPHUMEX Fr-fan-17h-252 Universal Ceiling Fan Remote Control to your ceiling fan, follow these steps:
1. Turn off the power to your ceiling fan at the circuit breaker or fuse box.
2. Locate the receiver unit in the fan housing. It is usually a small box that connects to the fan's wiring.
3. Open the battery compartment of the remote control and ensure that the batteries are properly inserted.
4. Turn on the power to your ceiling fan.
5. On the remote control, press and hold the "Fan" and "Light" buttons simultaneously for about 5 seconds until the LED indicator on the remote control starts flashing.
6. Within 30 seconds, locate the "Learn" or "Pairing" button on the receiver unit in the fan housing. Press and release this button.
7. The LED indicator on the remote control should stop flashing and remain lit, indicating that the remote control has been successfully programmed to the receiver.
8. Test the remote control by pressing the buttons to control the fan's speed, turn it on or off, and control any additional features such as light dimming (if applicable).
Note: The specific programming instructions may vary depending on your ceiling fan model and the remote control. It is recommended to refer to the user manual provided with the LPHUMEX Fr-fan-17h-252 for detailed programming instructions specific to your fan model.
Add New Comment