User Manual Q&AAnswer
Dec 07, 2024 - 03:31 AM
To set up the Shark RV1001 Home Mapping Robot Vacuum, follow these steps:
1. Choose a level surface in a central area of your home for the Charging Dock. Remove any objects that are closer than 3 feet from either side of the dock, or closer than 5 feet from the front of the dock.
2. Place the dock with its back against the wall. Connect the Charging Cord to the port on the back of the dock, then plug it into an outlet. The indicator light on the dock will illuminate green when it has power. The dock must be plugged in continuously for the robot to find it.
3. Snap the 2 included Side Brushes onto the square pegs on the bottom of the robot.
4. To charge the robot, make sure the Power button on the side of the robot is in the ON position (I). The robot will beep when charging begins.
That's it! Your Shark RV1001 Home Mapping Robot Vacuum is now set up and ready to use. For more detailed information and instructions, please refer to the Owner's Guide provided with the product.
Add New Comment