User Manual Q&AAnswer
Dec 07, 2024 - 03:31 AM
When installing the Hemudu HT04B-002U Universal TV Stand, it is important to choose the right screws for your TV. Here is how you can do it:
1. Refer to the VESA compatibility of your TV: The Hemudu HT04B-002U Universal TV Stand supports VESA mounting hole patterns ranging from 100x100mm to 600x400mm. Check the back of your TV for the VESA pattern information, which is usually indicated in the user manual or on a sticker.
2. Measure the xxxx length: Once you know the VESA pattern of your TV, measure the depth of the mounting holes on the back of your TV. This will help you determine the length of the screws you need.
3. Check the provided screws: The Hemudu HT04B-002U Universal TV Stand comes with a variety of screws in different sizes. Refer to the parts list in the instruction manual to identify the screws that are included.
4. Test the screws: Before fully tightening the screws, test them by gently screwing them into the mounting holes on the back of your TV. Make sure they fit securely without being too loose or too tight. If the provided screws do not fit properly, you may need to purchase screws separately that match the VESA pattern and depth of your TV's mounting holes.
5. Tighten the screws: Once you have chosen the correct screws, use a screwdriver or the provided Allen wrench to securely tighten them into the mounting holes on the back of your TV. Make sure they are tightened evenly and do not over-tighten to avoid damaging the TV.
By following these steps and referring to the instruction manual, you can choose the right screws for your TV when installing the Hemudu HT04B-002U Universal TV Stand.
Add New Comment