User Manual Q&AAnswer
Dec 07, 2024 - 03:13 AM
To connect your devices to the Onkyo TX-NR676 A/V Receiver, follow these steps:
1. Identify the HDMI ports on the back of the receiver. There are a total of 7 HDMI inputs and 2 HDMI outputs.
2. Connect your TV to the HDMI OUT MAIN port using an HDMI cable. This will allow you to view the video output from your devices on your TV.
3. Connect your Blu-ray player, gaming console, and any other devices to the HDMI inputs on the receiver using HDMI cables. Make sure to connect each device to a separate HDMI input.
4. Once all the devices are connected, turn on the receiver and your TV.
5. Use the remote controller provided with the receiver to navigate to the "Home" menu on the TV screen.
6. Select the "Setup" option and then choose "HDMI Setup."
7. In the HDMI Setup menu, you can configure settings such as HDMI Control, HDMI Standby Through, and HDMI Audio Out. Adjust these settings according to your preferences.
8. To assign audio and video inputs to the correct HDMI inputs on the receiver, go to the "Input Assign" menu. Here, you can select the appropriate HDMI input for each device connected to the receiver.
9. Once you have assigned the inputs, you can use the "Input" button on the remote controller to switch between devices and enjoy your audio and video content through the Onkyo TX-NR676 A/V Receiver.
For more detailed instructions and illustrations, please refer to the user manual provided with the Onkyo TX-NR676 A/V Receiver.
Add New Comment