User Manual Q&AAnswer
Dec 07, 2024 - 02:56 AM
To install and connect the DOGAIN E12 Smart Light Bulbs to the app, please follow the steps below:
1. Install the App: Start by downloading and installing the DOGAIN app from the App Store or Google Play Store on your smartphone or tablet.
2. Make the Bulb Flash: Turn on the power supply for the smart bulb. The bulb will start flashing quickly (once per second). This indicates that it is ready to connect.
3. Connect to the App: Open the DOGAIN app on your device and follow the on-screen instructions to add a new device. Make sure your smartphone or tablet is connected to a 2.4GHz Wi-Fi network.
4. Failed Connection: If the connection fails, try the following steps:
a. Make the Bulb Flash Slowly: Turn off the power supply for the smart bulb and then turn it back on. The bulb should now flash slowly (once every 2 seconds).
b. Retry Connection: Open the DOGAIN app and try to connect the bulb again by following the on-screen instructions.
By following these steps, you should be able to successfully install and connect your DOGAIN E12 Smart Light Bulbs to the app. If you encounter any further issues, please refer to the user guide provided with the product or contact DOGAIN customer support for assistance.
Add New Comment