User Manual Q&AAnswer
Dec 07, 2024 - 02:48 AM
Installing the Pyle PLMR22CR Waterproof Off-Road Speakers on your off-road vehicle is a straightforward process. Here are the step-by-step instructions:
1. Determine the mounting location: Choose a suitable location on your off-road vehicle where you want to mount the speakers. Common mounting locations include handlebars, roll cages, or any other position that is convenient for you.
2. Prepare the mounting bracket: The speakers come with a rugged, universal mount bracket design for roll-bars or roll-cages. Adjust the bracket to fit the diameter of the mounting location on your vehicle. For diameters ranging from 0.94 to 1.18 inches, use the 25mm screws.
3. Loosen the rotation adjustment xxxx : Once the bracket is adjusted, locate the rotation adjustment xxxx on the lower mounting bracket. Loosen this xxxx to allow for rotation.
4. Rotate the lower mounting bracket: Rotate the lower mounting bracket to the desired position that aligns with the mounting location on your vehicle.
5. Lock the rotation adjustment xxxx : Once the bracket is in the desired position, tighten the rotation adjustment xxxx to lock it in place.
6. Wiring connection: Use the quick butt connector provided with the speakers to connect the speaker wiring to your vehicle's audio system. Follow the wiring instructions in the user manual for proper connection.
7. Test and secure: After the wiring is connected, test the speakers to ensure they are working properly. Once confirmed, secure the speakers in place using the mounting hardware provided.
Please refer to the Pyle PLMR22CR Waterproof Off-Road Speakers User Manual for more detailed instructions and illustrations.
Add New Comment