User Manual Q&AAnswer
Dec 07, 2024 - 01:53 AM
Loading and unloading materials in the Silhouette WHT-4T Cameo 4 Cutting Machine is a straightforward process. Here's a step-by-step guide based on the user manual:
1. Power on the machine and connect it to your computer using the provided USB cable.
2. Open the lid of the machine by lifting it upwards.
3. Place your material on the cutting mat. Ensure that the material is within the cutting area and align it with the grid on the mat for accurate cutting.
4. Adjust the white rollers on the machine to match the width of your material. The rollers should be positioned on the outer edges of the material to secure it in place.
5. Feed the cutting mat with the material into the machine from the front, aligning it with the front edge of the machine. Make sure the mat is straight and properly aligned.
6. Press the "Load" button on the machine or click on the "Load" option in the Silhouette Studio software on your computer. The machine will automatically pull the mat into the machine until it reaches the starting position.
7. Once the material is loaded, you can proceed to select your desired design and adjust the cutting settings in the Silhouette Studio software.
8. After setting up the design and cutting settings, click on the "Send" button in the software to start the cutting process. The machine will begin cutting the design on the loaded material.
9. Once the cutting is complete, the machine will automatically stop. Press the "Unload" button on the machine or click on the "Unload" option in the software to release the cutting mat.
10. Gently pull the cutting mat out of the machine, ensuring that the material remains flat and undisturbed.
By following these steps, you should be able to load and unload materials in the Silhouette WHT-4T Cameo 4 Cutting Machine without any issues. For more detailed instructions and illustrations, please refer to the user manual provided.
Add New Comment