User Manual Q&AAnswer
Dec 07, 2024 - 01:45 AM
To set up your NETGEAR N600 WiFi Cable Modem Router, follow these steps:
1. Connect the modem router to the cable outlet using the coaxial cable provided.
2. Connect the power adapter to the modem router and plug it into an electrical outlet.
3. Use an Ethernet cable to connect your computer to one of the Ethernet ports on the modem router.
4. Open a web browser on your computer and enter "http://www.routerlogin.net" or "http://192.168.0.1" in the address bar.
5. The NETGEAR genie setup wizard will launch. Follow the on-screen instructions to complete the initial setup process.
6. When prompted, enter the default username and password. The default username is "admin" and the default password is "password". Note that these are case-sensitive.
7. Once you have completed the setup wizard, you can customize your wireless network settings, such as the network name (SSID) and password, by logging into the router's web interface.
For more detailed instructions and troubleshooting tips, refer to the NETGEAR N600 WiFi Cable Modem Router User Manual provided in the link you provided.
Add New Comment