User Manual Q&AAnswer
Dec 07, 2024 - 01:41 AM
To install the BAZZ SLDSK6RGBTNWWF 6 Wi-Fi LED Recessed Fixture, follow these steps:
1. Shut off the power supply before starting the installation.
2. Connect the black wire (live) from the fixture to the colored wire, the white wire (neutral) to the white wire, and the bare copper wire (ground) to the bare copper wire from the electrical supply. It is recommended to use a wire clip (not included) for secure connections.
3. Hold the clips upward and insert the recessed fixture into the installation hole.
4. Once the fixture is securely in place, you can proceed with the setup and configuration.
For more detailed instructions and illustrations, please refer to the BAZZ SLDSK6RGBTNWWF 6 Wi-Fi LED Recessed Fixture Instruction's Manual.
Note: It is important to have the installation performed by a certified electrician and to comply with local and national codes for proper installation.
Add New Comment